Accessories
ACCES offers a wide variety of accessories for our broad product line: Screw Terminal Adaptors, Cables, Signal Conditioners, and more
| MODEL | DESCRIPTION |
|---|---|
104-PROTO $89.00 |
PC/104 prototype board. Necessary connectors and hardware are provided. |
104-STA-16(X) $99.00 |
Screw terminal PC/104 board for 104-AIO16E or 104-AIO16A. X = (E) or (A) , (includes cables). |
ADAP9 $19.00 |
The APAP9 screw terminal adaptor is designed to connect directly to ACCES single-port DB9 serial cards or any cable with DB9M connectors and includes holes for board or panel mounting. The adaptor provides a right-angle DB-9 female connector to 9 screw terminals. This adaptor is useful for breaking out serial and digital I/O signals and simplifies field wiring of RS-422 and RS-485 networks with different pin out configurations. |
ADAP9-2 $25.00 |
The APAP9-2 screw terminal adaptor is designed to connect directly to ACCES dual-port DB9 serial cards or any cable with DB9M connectors and includes holes for board or panel mounting. The adaptor provides dual right-angle DB-9 female connectors to 18 screw terminals (two groups of 9 screw terminals). This adaptor is useful for breaking out serial and digital I/O signals and simplifies field wiring of RS-422 and RS-485 networks with different pin out configurations. |
ADAP25 $35.00 |
Screw Terminal Adaptors - These connectors provide easy means to connect field wiring to I/O cards. They plug directly into the card's I/O connector and extend out the back of the computer. ADAP25 is designed to mate with 25-pin Male connectors (female connectors are on the ADAPxx cards). Each can also be specified with male connectors for use with cards such as the ISA or PCI-WDG-CSM. Please specify ADAP25M ($50) when ordering. |
ADAP37 $40.00 |
Screw Terminal Adaptors - These connectors provide easy means to connect field wiring to I/O cards. They plug directly into the card's I/O connector and extend out the back of the computer. ADAP37 is designed to mate with 37-pin Male connectors (female connectors are on the ADAPxx cards). Each can also be specified with male connectors for use with cards such as the ISA or PCI-WDG-CSM. Please specify ADAP37M ($60) when ordering. |
| DIN-SNAP $20.00 |
One foot length SNAP-TRACK with four clips, for mounting up to two STB-XX screw terminal boards on a DIN rail. |
| DIN-SNAP-6 $15.00 |
Six inch length SNAP-TRACK with two clips, for mounting one STB-XX screw terminal board on a DIN rail. |
| SNAP-TRACK $10.00 |
SNAP-TRACK is used for mounting the STB-37 and STB-50 Screw Terminal Cards. They're also adaptable for DIN-Rail mounting of devices. Available in various lengths. This part is included in the STB-37/2 Kit. |
| SNAP-TRACK-6 $6.00 |
Six inch length of SNAP-TRACK mounting rail for one STB-XX product |
STA-25 $79.00 |
Screw Terminal Cards - Provide screw termination capability for input wiring and ribbon cable connectors for outputs to ACCES Cards. These cards are provided with stand-offs and easily install in a T-Box. |
STA-37 $79.00 |
Screw Terminal Cards - Provide screw termination capability for input wiring and ribbon cable connectors for outputs to ACCES Cards. These cards are provided with stand-offs and easily install in a T-Box. |
STA-50 $79.00 |
Screw Terminal Cards - Provide screw termination capability for input wiring and ribbon cable connectors for outputs to ACCES Cards. These cards are provided with stand-offs and easily install in a T-Box. |
| STA-50-SCSI $99.00 |
Screw terminal assembly with one 50-pin SCSI type connector |
| STA-68(L) $99.00 |
Screw terminal assembly with one 68 pin SCSI type connector (L version includes latching connector) |
| STA-100 $99.00 |
Screw terminal assembly with one 100 pin SCSI type connector |
STA-112 $79.00 |
Screw Terminal Cards - Provide screw termination capability for input wiring and ribbon cable connectors for outputs to ACCES Cards. These cards are provided with stand-offs and easily install in a T-Box. |
| STB-10-2 |
Screw Terminal Products for use with any ACCES I/O card that has two 10 pin mating connectors. These cards can mount on SNAP-TRACK for easy mounting to a panel or plate, or for desktop development. |
STB-25(X) $44.00 |
Screw Terminal Products for use with any ACCES I/O card that has a 25 (or 26) pin mating connector. Additionally cable accessory P/N C104-50F-D25M allows for a 50-pin header connector to break out to 2 DB25M connectors. These cards can mount on SNAP-TRACK for easy mounting to a panel or plate, or for desktop development. X = (M) or (F) to identify the DB25 mounted on board as male or female. |
| STB-26 $44.00 |
Screw Terminal Products for use with any ACCES I/O card that has a 26 pin mating connector. These cards can mount on SNAP-TRACK for easy mounting to a panel or plate, or for desktop development. |
| STB-34 $44.00 |
Screw Terminal Products for use with any ACCES I/O card that has a 34 pin mating connector. These cards can mount on SNAP-TRACK for easy mounting to a panel or plate, or for desktop development. |
STB-37 $39.00 |
Screw Terminal Products accept 26 to 10 AWG wiring, for use with any ACCES I/O card that has a 37 pin mating connector. These cards can mount on SNAP-TRACK for easy mounting to a panel or plate, or for desktop development. |
STB-37/2 Kit $159.00 |
STB-37/2 Kit is a Screw Terminal and Cabling solution mounted on a SNAP-TRACK for use with the PCI-IIRO-16 and the PCI-IDIO-16 Isolated Digital Input/Output Cards. Elegant solution suitable for production delivery and OEM final solutions. Includes two STB-37 screw terminal cards, Y Cable, and 1' SNAP-TRACK. |
| STB-40 $44.00 |
Screw Terminal Products for use with any ACCES I/O card that has a 40 pin mating connector. These cards can mount on SNAP-TRACK for easy mounting to a panel or plate, or for desktop development. |
| STB-44 $44.00 |
Screw Terminal Products for use with any ACCES I/O card that has a 44 pin mating connector. These cards can mount on SNAP-TRACK for easy mounting to a panel or plate, or for desktop development. |
STB-50 $44.00 |
Screw Terminal Products for use with any ACCES I/O card that has a 50 pin mating connector. These cards can mount on SNAP-TRACK for easy mounting to a panel or plate, or for desktop development. |
STB-68 $69.00 |
Screw Terminal Products for use with any ACCES I/O card that has a 68 pin mating connector. These cards can mount on SNAP-TRACK for easy mounting to a panel or plate, or for desktop development. |
STB-68 Kit $89.00 |
Used for mounting the STB-68 to the enclosure of both the USB-AI and Fast USB-DIO Series of USB products. Includes STB-68, cable and specialized mounting hardware. |
STB-120CH $249.00 |
50-Pin Multi-Header Universal Screw Terminal Board for up to 120 Digital I/O Channels |
| STB-96CH $219.00 |
50-Pin Multi-Header Universal Screw Terminal Board for up to 96 Digital I/O Channels |
| STB-72CH $179.00 |
50-Pin Multi-Header Universal Screw Terminal Board for up to 72 Digital I/O Channels |
| STB-48CH $149.00 |
50-Pin Multi-Header Universal Screw Terminal Board for up to 48 Digital I/O Channels |
TAD8-16 $115.00 |
These are for use with Analog and Digital cards model AD8-16 respectively. These cards not only provide screw terminal termination for analog inputs but, also separate screw terminals for digital inputs and outputs. Unlike the STA-xx line of screw terminal adaptors, the terminals on these products have pin-names instead of numbers associated with them. |
TAD12-8 $115.00 |
These are for use with Analog and Digital cards model AD12-8. These cards not only provide screw terminal termination for analog inputs but, also separate screw terminals for digital inputs and outputs. Unlike the STA-xx line of screw terminal adaptors, the terminals on these products have pin-names instead of numbers associated with them. |
 USB-STB-84$79.00 |
Internal plug-in screw termination board for USB isolated input and relay output boards. |
| UTBK-10R |
10-pin universal screw terminal connector |
| UTBK-26R |
26-pin universal screw terminal connector |
| UTBK-34R |
34-pin universal screw terminal connector |
| UTBK-40R |
40-pin universal screw terminal connector |
| UTBK-44R |
44-pin universal screw terminal connector |
UTBK-50 $49.00 |
50-pin universal screw terminal connector |
| UTBK-50R |
50-pin universal screw terminal connector |
| MODEL | DESCRIPTION |
|---|---|
104-AIM-ADAP $75.00 |
PC/104 stacking card to adapt AIM-16 Analog Input Multiplexer to our 104/AIO12-8 Card for connecting with many thermocouples, RTDs, etc. |
C104-XXF-12 $12.00 - $15.00 |
The C104-XXF-12 series of ribbon cables have standard IDC connectors for use with all of our I/O modules and screw terminal boards. Standard length is 12 inches. Select from an assortment of 10, 26, 34, 40, 44, or 50-pin cables. Call for other widths or lengths. |
| C104-40F/D37F $17.50 |
40 pin ribbon to DB37 female cable |
| C104-40F-D9M $15.00 |
40 pin ribbon cable with female header to 4 DB9M connectors, 12" long |
| C104-50F-D9M2 $29.00 |
50 pin ribbon cable with female header to two DB9M connectors, 12" long |
| C104-50F-D9M4 |
50 pin ribbon cable with female header to four DB9M connectors, 12" long |
| C104-50F-D9M8 |
50 pin ribbon cable with female header to eight DB9M connectors, 12" long |
| C104-50F-D25M $19.00 |
50 pin ribbon cable with female header to 2 DB25M connectors, 12" long |
C104-D37M/D9M $31.00 |
This 3' round-wire external serial breakout cable provides four male DB9 connectors from a male DB37 connector. Useful for system cabling and can be mated with C104-40F/D37F for various PC/104 serial requirements. |
| C34FF(XX)DF37 |
34 pin ribbon cable to DB37 female. (XX) is length in inches: 7, 15, 30 or 36. |
C68MM-1.75 $19.00 |
68-pin male to male SCSI ribbon cable, 1.75 inches long. Used to connect our STB-68 screw terminal board with the USB-AI and the Fast USB-DIO Series modules. |
C68PS18L $29.00 |
This 68-Pin SCSI 18" round-wire shielded cable is used to connect our STB-68 screw terminal board with the USB-AI and the Fast USB-DIO Series modules. |
| CA37-1 $35.00 |
Cable adapter used to connect P/N AIM-16P to a variety of ACCES A/D boards |
| CA37-2 $35.00 |
As above except for use with a second set of AIM-16P's |
CAB37-xx $25.00 |
Ribbon Cables - CAB37-18 is a standard 18-inch long(455mm) cable with 37-pin connectors (for cables longer than 18", add $2 per foot over 18"). |
| CAB37-18Y $29.00 |
"Y" Cable for connecting two AIM-16 Analog Input Multiplexers to an A/D Card. |
| CAB37YS-4 |
Split cable assembly for use when two CA37's are used |
| CAB50-3-SCSI $40.00 |
Three foot 50-pin SCSI round wire cable |
| CAB100-6-SCSI $99.00 |
Six foot 100-pin SCSI round wire cable |
CAB-50-xx $30.00 |
Ribbon Cables - CAB50-6 is designed for use with the A16A and A24A, and has a 50-pin female header on one end, and a card-edge socket on the other. |
CAB50F-xx $30.00 |
Ribbon Cables - CAB50F-6 and CAB50F-xx have female header mating connectors on both ends (for cables longer than 6', add $2 per foot over 6'). |
| CAB68-36 $40.00 |
CAB68-36 Cable is a 3' round-wire cable for use with the PCI-DIO-48JPL(S) for elegant OEM solutions. The cable is available with either one-touch lock latches (CAB68-36L), or jack screws (CAB68-36J). |
CAB78-37/2 $70.00 |
CAB78-37/2 Cable is a 6' round-wire "Y" cable for use with the PCI-IIRO-16 and the PCI-IDIO-16 which connects to the DB-78 connector on these card's mounting brackets and terminated in two DB-37 female connectors. |
| CAB-COM-8S |
Breakout Cable for PCI-COM485/8 Serial Communication Card. Normally it is included when purchasing the card, but it is also separately available. |
| CAB-PC-PWR |
Internal Power Cable |
| CAB-RA-COM |
Remote ACCES COM Cable |
| CAB-RA-PWR |
Fused Power Cable |
| EXTENDER |
AT-BUS extender card raises add-on card above others |
| PC-POWER-OUT |
Use your computer's power supply for your external equipment, including our Remote ACCES Distributed I/O, with this handy accessory. This is also part of the Remote ACCES Cable Kit. |
| PTRC-CAB6 |
Spare 2-meter cable for PTRC-AT |
| RA-CAB-KIT |
REMOTE ACCES cable kit includes power option from PC, fused power and serial communication cable |
| RA-PS12/5 |
REMOTE ACCES 10 watt power supply (outputs +12V and +5V from 115VAC) |
| USB-PWR $25.00 |
External power supply AC/DC adapter for USB product line |
| ZTR-XX |
"Zippertubing" shielded protective jacket for ribbon cable (XX = length in feet) |
| MODEL | DESCRIPTION |
|---|---|
| 104-BP2 $99.00 |
Backplane with two side-by-side 16-bit PC/104 connectors. |
| 104-SPC-KIT $20.00 |
PC/104 spacer kit; includes 16-bit pass-through connector and hardware kit. |
| 104-HDW-KIT(X) $10.00 |
Hardware kit for ACCES PC/104 boards; includes 4 screws, nuts and standoffs. Specify metric (M) or standard (S) hardware kit. |
T-Box $45.00 |
This is a 5 5/16" x 8" x 2" steel enclosure that accommodates the STA-series Screw Terminal Cards, the AIM-16 Analog Terminator and Multiplexer Card, the ROB-8A Relay Card, the "G" Remote ACCES products, and the LVDT-8 Card, standard. Certain other products can be mounted in the T-Box using adaptors. |
PCI-P104-ADAP $129.00 |
PCI to PC/104-Plus adapter card permits a PC/104-Plus board to be installed in a PCI slot |
MP104-DIN $19.00 |
Kit allows DIN rail mounting of any USB/104 module, either with, or without an enclosure. |